91
Tech Notes / FAQ / Re: RS232 Control Protocol v1.1
« Last post by Myro Control on May 06, 2014, 11:03:56 am »Attached is the pinout for RS-232 cable for Myro:Air.
Recent Posts
92
Tech Notes / FAQ / RS232 Control Protocol v1.1
« Last post by Myro Control on May 06, 2014, 10:59:21 am »Here is version 1.1 of the RS232 commands for Myro:Air.
Features in GREEN available in firmware version 1.2.6 or higher.
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
REQ = Request
RES = Response
REQ: *IP_ADDRESS<cr>
RES: #4372|XXX.XXX.XXX.XXX<cr>
REQ: *VER<cr>
RES: #522|1.0.0/I2013082900469602<cr>
REQ: *NEXT_TRACK<cr>
RES: #4385|OK<cr>
REQ: *PREV_TRACK<cr>
RES: #4364|OK<cr>
REQ: *PAUSE<cr>
RES: #1220|OK<cr>
REQ: *PLAY<cr>
RES: #848|OK<cr>
REQ: *ALBUM<cr>
RES: #1218|[ALBUM TITLE]<cr>
REQ: *ARTIST<cr>
RES: #1783|[ARTIST TITLE]<cr>
REQ: *SONG<cr>
RES: #824|[SONG TITLE]<cr>
REQ: *STREAM_TYPE<cr>
RES: #5413|[STREAM_TYPE]<cr>
REQ: *ALL_META<cr>
RES: #2849|[STATUS_TEXT]|[ALBUM]|[ARTIST]|[SONG]|[ELAPSED_TIME]|[TOTAL_TIME]<cr>
REQ: *ELAPSED_TIME<cr>
RES: #6131|[ELAPSED_TIME]<cr>
REQ: *TOTAL_TIME<cr>
RES: #4402|[TOTAL_TIME]<cr>
REQ: *ALBUM_ART<cr>
RES: #3707|[ALBUM_ART_AVAILABLE]|[URL]<cr>
(** NOTE: [ALBUM_ART_AVAILABLE] = 0 for no, 1 for yes)
REQ: *STATUS<cr>
RES: #1796|[STREAM_TYPE]|[STATUS_TEXT]|[TRANSPORT_STATUS]<cr> (example: #2A|Ready for AirPlay...|3<cr>)
REQ: *DEVICE_NAME<cr>
RES: #5064|[DEVICE_NAME]<cr>
REQ: *MEM<cr>
RES: #498|[FREE MEM]<cr>
REQ: *ID<cr>
RES: #258|[ID]<cr>
EVENT WHEN TRACK CHANGES OR IS PLAYING UPDATES EVERY SECOND:
RES: @[STREAM_TYPE]|[STATUS_TEXT]|[TRANSPORT_STATUS]|[ALBUM]|[ARTIST]|[SONG]|[ELAPSED_TIME]|[TOTAL_TIME]|[ALBUM_ART_AVAILABLE]
(** NOTE: [ALBUM_ART_AVAILABLE] = 0 for no, 1 for yes)
EVENT WHEN ALBUM ART URL IS AVAILABLE:
RES: !|http://xxx.xxx.xxx.xxx/url_to_the_art.jpg
Features in GREEN available in firmware version 1.2.6 or higher.
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
REQ = Request
RES = Response
REQ: *IP_ADDRESS<cr>
RES: #4372|XXX.XXX.XXX.XXX<cr>
REQ: *VER<cr>
RES: #522|1.0.0/I2013082900469602<cr>
REQ: *NEXT_TRACK<cr>
RES: #4385|OK<cr>
REQ: *PREV_TRACK<cr>
RES: #4364|OK<cr>
REQ: *PAUSE<cr>
RES: #1220|OK<cr>
REQ: *PLAY<cr>
RES: #848|OK<cr>
REQ: *ALBUM<cr>
RES: #1218|[ALBUM TITLE]<cr>
REQ: *ARTIST<cr>
RES: #1783|[ARTIST TITLE]<cr>
REQ: *SONG<cr>
RES: #824|[SONG TITLE]<cr>
REQ: *STREAM_TYPE<cr>
RES: #5413|[STREAM_TYPE]<cr>
REQ: *ALL_META<cr>
RES: #2849|[STATUS_TEXT]|[ALBUM]|[ARTIST]|[SONG]|[ELAPSED_TIME]|[TOTAL_TIME]<cr>
REQ: *ELAPSED_TIME<cr>
RES: #6131|[ELAPSED_TIME]<cr>
REQ: *TOTAL_TIME<cr>
RES: #4402|[TOTAL_TIME]<cr>
REQ: *ALBUM_ART<cr>
RES: #3707|[ALBUM_ART_AVAILABLE]|[URL]<cr>
(** NOTE: [ALBUM_ART_AVAILABLE] = 0 for no, 1 for yes)
REQ: *STATUS<cr>
RES: #1796|[STREAM_TYPE]|[STATUS_TEXT]|[TRANSPORT_STATUS]<cr> (example: #2A|Ready for AirPlay...|3<cr>)
REQ: *DEVICE_NAME<cr>
RES: #5064|[DEVICE_NAME]<cr>
REQ: *MEM<cr>
RES: #498|[FREE MEM]<cr>
REQ: *ID<cr>
RES: #258|[ID]<cr>
EVENT WHEN TRACK CHANGES OR IS PLAYING UPDATES EVERY SECOND:
RES: @[STREAM_TYPE]|[STATUS_TEXT]|[TRANSPORT_STATUS]|[ALBUM]|[ARTIST]|[SONG]|[ELAPSED_TIME]|[TOTAL_TIME]|[ALBUM_ART_AVAILABLE]
(** NOTE: [ALBUM_ART_AVAILABLE] = 0 for no, 1 for yes)
EVENT WHEN ALBUM ART URL IS AVAILABLE:
RES: !|http://xxx.xxx.xxx.xxx/url_to_the_art.jpg
93
Firmware / Matrix Firmware v1.3.25
« Last post by Myro Control on May 04, 2014, 01:55:42 pm »We have released v1.3.25 which does the following:
- Adds support for new Matrix Switchers
Please create a support ticket to get the firmware download tool -- please specific OSX or Windows.
- Adds support for new Matrix Switchers
Please create a support ticket to get the firmware download tool -- please specific OSX or Windows.
94
Firmware / Sonos Firmware v2.2.2
« Last post by Myro Control on May 04, 2014, 01:54:09 pm »We have released v2.2.2 which does the following:
- Fixed Rhapsody Queue Playstate issues
- Fixed behind metadata issue for XM
- Other minor performance fixes
Please create a support ticket to get the firmware download tool -- please specific OSX or Windows.
- Fixed Rhapsody Queue Playstate issues
- Fixed behind metadata issue for XM
- Other minor performance fixes
Please create a support ticket to get the firmware download tool -- please specific OSX or Windows.
95
General Discussion / GIVEAWAY: Win a Myro:Air!
« Last post by Myro Control on May 03, 2014, 08:22:13 pm »Enter to win a Myro:Air (valued at $599), that's right! Visit Mavromatic for the details.
96
General Discussion / Myro:Air Featured on Revision3's Tekzilla Bites
« Last post by Myro Control on April 29, 2014, 09:44:11 am »97
Tech Notes / FAQ / Re: Myro:Bridge - Matrix switcher firmware supported device list
« Last post by Myro Control on April 29, 2014, 08:09:50 am »Hi, i need to know how many zones of wyrestorm are supported. I Can multiple wirestrom units stacked together be controlled via Russound stacked units.? I have an installation that consists of 3 c5 units connected together via r-net. I think we will need more than 1 matrix. Will myro talk to both matrices?
Hi, yes you can use a single Myro:Bridge with multiple connected Russound controllers. We currently support up to 16 zones. How many video sources and outputs will your 3 C5 need?
You can also daily chain Myro:Bridges together to control 2 8x8's or 4x8, etc. Or you can use 2 Key Digital Matrix and use a single Myro:Bridge with our Key Digital (Daisy-chained A01/A02 Prefix) feature. This works great and limits the need to manage two Myro:Bridges.
Lots of options -- but please provide a bit more detail on how many inputs / outputs you plan on using with this project.
98
Tech Notes / FAQ / Re: Myro:Bridge - Matrix switcher firmware supported device list
« Last post by QuintinE on April 29, 2014, 04:08:55 am »Hi, i need to know how many zones of wyrestorm are supported. I Can multiple wirestrom units stacked together be controlled via Russound stacked units.? I have an installation that consists of 3 c5 units connected together via r-net. I think we will need more than 1 matrix. Will myro talk to both matrices?
99
Tech Notes / FAQ / Russound: Setting Myro:Link ID to RNET ID (Source)
« Last post by Myro Control on April 25, 2014, 08:48:46 am »If you are setting up a Myro:Air to work with a Russound system, it has been tested to work with the following RNET based Russound systems:
- CAM
- CAV
- E-Series (Sphere)
- C-Series (C3/C5)
To use Myro:Air as a Russound "Smart Source" you need to setup as you would an "iBridge Dock". Typical settings for CAV is setting the Command type as "Peripheral" and the Myro:Link ID to match the Source number (e.g. Myro:Air connected to Source 2 input, set Myro:Link ID to 2).
For E & C-Series systems, you setup the source in the windows system configuration software (SCS). Select the source and apply the "iBridge Dock" template to the source input.
Please note: We advise not to connect Myro:Air to Source Input 1 (Myro:Link ID 1) because that is typically reserved for the built in AM/FM radio of the C3/C5. We have also experienced issues with CAM/CAV when using ID 1.
- CAM
- CAV
- E-Series (Sphere)
- C-Series (C3/C5)
To use Myro:Air as a Russound "Smart Source" you need to setup as you would an "iBridge Dock". Typical settings for CAV is setting the Command type as "Peripheral" and the Myro:Link ID to match the Source number (e.g. Myro:Air connected to Source 2 input, set Myro:Link ID to 2).
For E & C-Series systems, you setup the source in the windows system configuration software (SCS). Select the source and apply the "iBridge Dock" template to the source input.
Please note: We advise not to connect Myro:Air to Source Input 1 (Myro:Link ID 1) because that is typically reserved for the built in AM/FM radio of the C3/C5. We have also experienced issues with CAM/CAV when using ID 1.
100
Tech Notes / FAQ / Re: Myro:Bridge - Matrix switcher firmware supported device list
« Last post by Myro Control on April 23, 2014, 06:40:58 pm »For sure! Key Digital has a single protocol for their switchers which makes it very nice to integrate with. That said, if you plan on "daisy changing" 4x8's to accomplish a 4x16, our firmware has another setting you can do this only with Key Digital.