Myro Control   |   Myro:Air   |   Myro:Bridge   |   Myro:Home   |   Contact   |   Support

Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 10
41
Tech Notes / FAQ / Re: Crestron Control Module
« Last post by vincen on March 17, 2015, 08:43:51 am »
Some news about full control with navigation ? as I find nothing about it anywhere on website and no way to find full IP protocol promised one year ago....
42
Tech Notes / FAQ / Re: Russound MCA-5 HDMI Source
« Last post by Myro Control on March 09, 2015, 02:07:35 pm »
Yes, you need a matrix switcher and a Myro:Bridge to be able to use the system to switch the video source with the audio source.   Just make sure you get a matrix switcher that has enough outputs as displays in the system.

For example, if you only ever will need 3 sources (STB, Bluray, AppleTV) and have 6 zones with displays, you'll need a 4x8 Matrix leaving 1 open source and 2 open outputs for future use.
43
Tech Notes / FAQ / Russound MCA-5 HDMI Source
« Last post by jayday on March 09, 2015, 11:36:04 am »
I have installed a Russound MCA-5 and ready to order a Myro Bridge.  I want to have a HDMI STB available as one of the 8 Russound sources. Do I need a HDMI switcher to accomplish this?
44
General Discussion / Re: Looking to buy HDMI Matrix switcher
« Last post by Myro Control on February 02, 2015, 08:07:35 am »
I can personally recommend matrix switchers by Key Digital and Wyrestorm.
 
45
General Discussion / Looking to buy HDMI Matrix switcher
« Last post by CKM on January 27, 2015, 12:47:36 pm »
Got my Russound setup with MCA-C5 and now want to add my TVs into the mix.
Any warnings or recommendations, especially as it pertains to myro:bridge?

Requirements/Desires (maybe most/all do this, but I like being specific, especially because I read a few horror stories):
Looking for stability on ALL existing connections when switching between sources and/or TVs with clean audio and video
Minimal lag between switching sources or initial HDMI handshakes
Doesn't make a lot of noise
Supports HDCP (hate to support this standard, but I hate potential incompatibility more)
Fully controllable from a myro:bridge perspective
Compatible with Redmere cable lengths
HDMI 1.4a or higher  (would love to hear anything about HDMI 2.0)



46
Feature Request / Re: Integration with the Russound XStream
« Last post by JimH on November 26, 2014, 12:12:23 pm »
I have one if you would like to borrow it to give it a go.
47
Feature Request / Re: Integration with the Russound XStream
« Last post by Myro Control on November 26, 2014, 08:02:39 am »
Hi Jim!

Been meaning to pick up an XStream to test integration with.   Perhaps Myro:Air can help for projects that require only AirPlay ;D
48
Feature Request / Integration with the Russound XStream
« Last post by JimH on November 25, 2014, 03:35:51 pm »
This would be a great addition given that the XStream has a digital input along with AirPlay, Pandora, vTune, etc. I am using it with my MCA-C5, but its not directly controllable (I am using a separate keypad for the XStream) and the metadata is not visible, since I am just using the line out from the XStream into a line input on the MCA-C5.

Both are IP addressed and I'd imagine there is a fair amount of overlap given they both utilize RIO.
49
I think I'm going to try out Myro Air. Please advise me on the best android apps to stream to the Russound MCA-C5.

Via Android, you can stream natively as Myro:Air is a UPnP/DLNA enabled device.   If you want to AirPlay via Android, you can use AirAudio (it needs to be rooted) or AllCast if you don't want to root.
50
General Discussion / Re: Complaints About Streaming Music/Video from Android Phone to Russound MCA-C5
« Last post by solomonk on November 20, 2014, 08:29:34 pm »
I think I'm going to try out Myro Air. Please advise me on the best android apps to stream to the Russound MCA-C5.
Pages: 1 ... 3 4 [5] 6 7 ... 10