Sonos firmware · v4.0.0
Your Sonos, on your Russound keypads.
Myro:Bridge makes a Sonos player a native RNET Smart Source. Select it on any keypad and it plays. The keypad buttons control it, and the display shows what's playing.

Two-way control
Play, pause, next and previous from every keypad and touchscreen on the RNET bus.
Live metadata
Artist, album and track go to the keypads the moment Sonos reports a change, along with station names for radio.
Auto-play
Turn on a keypad or select the Sonos source and it starts playing. No phone needed.
Streaming services
Good titles from every service.
Firmware v4.0.0 rewrote how Myro:Bridge reads Sonos now-playing data. We tested it against more than 80 captured events from real services, so radio stations, audiobooks and AirPlay all show something useful instead of a file name.
- Apple Music
- Amazon Music
- Pandora
- SiriusXM
- TuneIn
- Audible
- AirPlay
- Victrola Stream
Setup
Up and running in about five minutes.
- 1
Set up the Sonos player first
Get the Sonos player working in the Sonos app and connect it to your network by Ethernet. Run its line-out to a source input on your Russound controller and set the output to Fixed volume.
- 2
Connect Myro:Bridge
Plug in power, Ethernet and the RNET cable to your controller's RNET port. The bridge gets an address from your router by DHCP.
- 3
Choose the RNET source
Open http://<bridge IP>:1400 in a browser and pick the source ID (1–12) that matches the controller input you used.
- 4
Pair
When the keypad shows "Add a Sonos Component", press the pairing button on the Sonos player. The bridge remembers the player from then on, including after power cuts.
Beyond Russound
Sonos over RS-232 for any control system.
With Sonos firmware, the bridge's RS-232 port speaks a simple text protocol. Crestron, Control4, RTI, AMX and other controllers get transport control and two-way metadata from a Sonos player, with no IP driver to maintain.
RS-232 control protocol →
FAQ
Sonos questions.
Which Sonos players work?
Sonos Port, Connect and ZonePlayer models with line-level outputs. The player's audio goes to your Russound controller; Myro:Bridge handles control and metadata.
Can the Sonos still be used from the Sonos app?
Yes. Anything you start from the Sonos app shows up on the keypads, and the keypads keep working alongside the app.
How many Sonos players can I add?
One per bridge. For more, daisy-chain more bridges on the RNET bus with their IN and OUT jacks and give each its own source ID.
Does it need the internet?
No. Myro:Bridge talks to the Sonos player over your local network only.
Put Sonos on every keypad.
$349 with Sonos firmware installed. In stock and shipping from the USA.