Myro Control Forum

Myro:Bridge => Tech Notes / FAQ => Topic started by: Myro Control on June 11, 2013, 12:42:25 pm

Title: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on June 11, 2013, 12:42:25 pm
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: jayday on April 22, 2014, 07:37:03 am
Which of the supported switchers have been tested with HD Video on the Russound MCA-C5? I want to switch HD Video similar to SD switching on the CAV6.6.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on April 23, 2014, 08:11:14 am
I've updated the list with the new switchers we support ---

We recommend Key Digital and Wyrestorm matrix switchers.   SnapAV, Octava, Atlona are also great and have been tested.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: jayday on April 23, 2014, 11:03:13 am
Thanks for the update.  So Key Digital products such as KD-4x8, KD-6x6, KD-8x4 & KD-8x8 should switch HD Video with the Russound MCA-C5?
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on April 23, 2014, 06:40:58 pm
For sure!   Key Digital has a single protocol for their switchers which makes it very nice to integrate with.   That said, if you plan on "daisy changing" 4x8's to accomplish a 4x16, our firmware has another setting you can do this only with Key Digital.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: QuintinE on April 29, 2014, 04:08:55 am
Hi, i need to know how many zones of wyrestorm are supported. I Can multiple wirestrom units stacked together be controlled via Russound stacked units.? I have an installation that consists of 3 c5 units connected together via r-net. I think we will need more than 1 matrix. Will myro talk to both matrices?
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on April 29, 2014, 08:09:50 am
Hi, i need to know how many zones of wyrestorm are supported. I Can multiple wirestrom units stacked together be controlled via Russound stacked units.? I have an installation that consists of 3 c5 units connected together via r-net. I think we will need more than 1 matrix. Will myro talk to both matrices?

Hi, yes you can use a single Myro:Bridge with multiple connected Russound controllers.  We currently support up to 16 zones.   How many video sources and outputs will your 3 C5 need?   

You can also daily chain Myro:Bridges together to control 2 8x8's or 4x8, etc.  Or you can use 2 Key Digital Matrix and use a single Myro:Bridge with our Key Digital (Daisy-chained A01/A02 Prefix) feature.  This works great and limits the need to manage two Myro:Bridges.

Lots of options -- but please provide a bit more detail on how many inputs / outputs you plan on using with this project.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: jayday on May 09, 2014, 10:21:28 am
If you daisy chain two Key Digital 4x4's to a Russound, does it then function as a 4x8 to service 8 zones for video?
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on May 09, 2014, 04:37:15 pm
Yes.  That's how it works.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: techelec on July 23, 2014, 03:01:46 am
Hi Danny,

I occasionally need a 6 x 6 HDMI matrix, but the cost of a single 6 x 6 (or 8 x 8) are more than two 4 x 4 KD.  Can I use  two KD 4 x 4 to accomplish this?  I am using the Russound C5 with the Bridge.  Are there any limitations? Tx
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on July 24, 2014, 01:04:30 pm
Hi --  You sure can!

Key Digital is unique where you can "daisy-chain" their matrix.  You accomplish this by using the Key Digital (Daisy-chained A01/A02 Prefix) setting on Myro:Bridge and KD Matrix.

The only needs a single Myro:Bridge whereas other require a Myro:Bridge for each matrix.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: jayday on July 28, 2014, 09:10:00 am
With a Russound MCA-C5, can Myro:Bridge/Matrix Switcher be controlled by MyRussound App MRA-3? Can it be managed in a zone without a keypad installed, only the MyRussound App on a iPad?

Thanks
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on July 28, 2014, 08:26:18 pm
Sure can!  If you change a zone using Keypad or App or via 3rd Party (e.g. HAI, Crestron, etc) serial port it will switch the matrix.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: spotswoode@gmail.com on September 08, 2014, 02:14:33 pm
Hello.  I currently have a Russound CAV 6.6 with Russound VM1 (Video Matrix 1) system and it's been solid.  I am now looking to upgrade to HDMI switching and your product seems to be just what I need.  A couple of question that I am hoping you can answer:

I see that Atlona products have been tested and supported.  Does this include the Atlona AT-PRO3HD66M?  If so, do you have any experience with this product and are you able to share?

If I am using my existing setup with the CAV 6.6 and VM1 connected via RNET am I able to add the Myro:Bridge and the Atlona switch do I can have new HDMI sources integrated with my existing VM1 component sources.  I ask this because it gives me a means to migrate. 

Thank you for your time.

Regards,

Brian
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on September 09, 2014, 07:14:14 am
Hello.  I currently have a Russound CAV 6.6 with Russound VM1 (Video Matrix 1) system and it's been solid.  I am now looking to upgrade to HDMI switching and your product seems to be just what I need.  A couple of question that I am hoping you can answer:

I see that Atlona products have been tested and supported.  Does this include the Atlona AT-PRO3HD66M?  If so, do you have any experience with this product and are you able to share?

Yes, the AT-PRO3HD66M is supported and works well with Russound and Myro:Bridge.


If I am using my existing setup with the CAV 6.6 and VM1 connected via RNET am I able to add the Myro:Bridge and the Atlona switch do I can have new HDMI sources integrated with my existing VM1 component sources.  I ask this because it gives me a means to migrate. 

Thank you for your time.

Regards,

Brian

Yes, you can have both the VM1 and HDMI Matrix running together as long as your devices can output both HDMI and Component at the same time both should work fine.

Let me know if you have any further questions.
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: dimeji on July 02, 2018, 05:08:10 am
    We currently support Matrix Switchers by the following companies:

    • Atlona
    • Extron
    • Gefen
    • Grandbeing
    • HD Anywhere
    • Intelix
    • Key Digital
    • Kramer
    • Monoprice
    • Octava Inc.
    • SnapAV
    • Wyrestorm
    • Niles
    • CYP
    • Nexus & Leaf Matrix
    • Xantech
    • Vanco


    If you need support for a matrix switcher not listed, please create a support ticket and submit the RS-232 protocol document.

Hi,

Will the myro: bridge work with a Monoprice BlackBird 8x8?
Title: Re: Myro:Bridge - Matrix switcher firmware supported device list
Post by: Myro Control on August 19, 2018, 01:12:23 pm
    We currently support Matrix Switchers by the following companies:

    • Atlona
    • Extron
    • Gefen
    • Grandbeing
    • HD Anywhere
    • Intelix
    • Key Digital
    • Kramer
    • Monoprice
    • Octava Inc.
    • SnapAV
    • Wyrestorm
    • Niles
    • CYP
    • Nexus & Leaf Matrix
    • Xantech
    • Vanco


    If you need support for a matrix switcher not listed, please create a support ticket and submit the RS-232 protocol document.

Hi,

Will the myro: bridge work with a Monoprice BlackBird 8x8?

Please create a support ticket with the control protocol and we can add support if it's not already covered by one of the other protocols we support.