Myro Control   |   Myro:Air   |   Myro:Bridge   |   Myro:Home   |   Contact   |   Support

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Myro Control

Pages: 1 ... 11 12 [13] 14
181
Tech Notes / FAQ / Re: Sonos will not pair with Bridge
« on: July 03, 2013, 08:22:57 pm »
Please create a support ticket so we can work you through the steps to get your Myro:Bridge functioning.  Once we get it working for you then you can post a follow up to the forum.

Thanks!
Danny

183
Tech Notes / FAQ / Re: Sonos will not pair with Bridge
« on: July 01, 2013, 04:58:19 pm »
Hi!

This is normal -- you just need to complete the pairing process as done with all Sonos devices:

Press the volume up and mute button.  That will pair the Myro:Bridge with your Sonos:Connect

Thanks!
Danny

184
General Discussion / Re: Touchpanel
« on: June 19, 2013, 05:54:07 pm »
Hi there -- we don't offer the panels anymore.  As for the iOS software, we have shelved that for the time being as there wasn't much interest and have changed focus to hardware (Myro:Bridge and Myro:Air).

Thanks!
Danny

185
General Discussion / Order Myro:Air Now - NOW SHIPPING!
« on: June 11, 2013, 02:19:58 pm »
We are proud to announce that Myro:Air has begun shipping sooner than our expected ship date of May 1, 2014.   It's available for order today!  Be sure to place your order today!  Our stock is limited so make sure to order your unit sooner than later.

186
    We currently support Matrix Switchers by the following companies:

    • Atlona
    • Extron
    • Gefen
    • Grandbeing
    • HD Anywhere
    • Intelix
    • Key Digital
    • Kramer
    • Monoprice
    • Octava Inc.
    • SnapAV
    • Wyrestorm
    • Niles
    • CYP
    • Nexus & Leaf Matrix
    • Xantech
    • Vanco


    If you need support for a matrix switcher not listed, please create a support ticket and submit the RS-232 protocol document.

188
Tech Notes / FAQ / Myro:Bridge stops updating metadata
« on: May 31, 2013, 04:33:38 pm »
There are two typical causes to this issue:

1) The Sonos:Connect subscription duration is valid for about 1 hour in which it provides updates to the Myro:Bridge.  Within that time, Myro:Bridge refreshes or "re-subscribes" with the Sonos device.   If you find that you lose "sync" after an hour, it means that there is a problem with your network as Myro:Bridge cannot effectively subscribe to the Sonos.

2) Some "malformed" meta data is "killing" the bridge. We have had the occasional report, mostly caused by internet radio sources that can "hang" Myro:Bridge.  Pandora, MP3, Rhapsody, XM have never produced this issue as they control the metadata whereas the radio station could decided to send anything.  This is a rare occurrence, but if you ever experience this, please report it as a bug and what source caused it.

189
General Discussion / Re: Preproduction boards arrive this week!
« on: May 30, 2013, 01:35:50 pm »
Rev 2 boards scheduled to arrive this week!

190
Firmware / Matrix Firmware v1.3.7
« on: May 30, 2013, 07:58:31 am »
Change Log:
- Added "OFFLINE MODE" which allows the Myro:bridge Matrix Switcher Firmware to function when there is no LAN (or DHCP server) available once installed.  You only need it plugged into to the network when setting up the mapping via the onboard web page then you can unplug the network cable.    This was a dealer request for situations like yachts where power and network is limited.   

191
Firmware / Matrix Firmware v1.3.6
« on: May 30, 2013, 07:55:20 am »
Change Log:

- Added support for HD Anywhere HKM44-UK matrix switcher

192
Feature Request / Re: Display GUI and IP Camera views
« on: May 19, 2013, 01:46:07 pm »
Hi Pete --

1 - The display resolution is 16:9 and 800 X 480.  Is there a way to adjust the display such that if fills the screen?

I have a version that I will be releasing soon that offers 16:9 resolution.

2 - I am just starting to get into HD IP cameras and have been utilizing Zoneminder for many years.  That said I do have issues but can display my security cameras.  I use a simple link.  Here is what I use for the Omnitouch Extended Setup IP cameras which kind of works but only gives me a 4:3 display which I do not really like.

My preference is to utilize the camera server which today has 8 analog and 8 IP cameras.

Camera #1
Type: JPEG
Address/URL:
Code: [Select]
http://192.168.244.166/cgi-bin/nph-zms?mode=jpeg&monitor=1&scale=100&maxfps=5&buffer=1000&user=touch&pass=haiNumber: One

Is there a way to utilize the above mentioned link and provide a 16:9 view.  IE: I utilize 320X184, 640X368, 1280X720 (HD)?


BTW I tried to add a 3rd picture which is 118KB but had issues so will post in next message.

This is great feedback -- I will add 16:9 support to camera images.

Thanks!
Danny

193
General Discussion / Re: Preproduction boards arrive this week!
« on: May 17, 2013, 04:55:04 pm »
Here is a sneak peak at the boards working -- you can see some modifications made  :-[

194
News & Announcements / The Result Of Passion.
« on: May 14, 2013, 05:37:56 pm »
Just updated the Myro Control home page

I started Myro Control 5 years ago to create a better home control interface for my HAI OmniPro II home automation controller.   

Then, I needed a way to control 3rd Party devices via my Russound Controller.

Next, I wanted a better audio AirPlay streamer.

All this was a result of passion!

195
General Discussion / Re: Myro:Bridge new production run 5/15/2013
« on: May 07, 2013, 03:12:51 pm »
Myro:Bridge is now back in-stock -- we ship all backorders out Thursday (5/9/2013)!

Pages: 1 ... 11 12 [13] 14