Myro Control Forum

Myro:Bridge => Tech Notes / FAQ => Topic started by: Teamstream on June 28, 2013, 03:37:31 pm

Title: Sonos will not pair with Bridge
Post by: Teamstream on June 28, 2013, 03:37:31 pm

Hello,

I have a Russound MCA-C5 with Sonos CONNECT on source 6, as instructed.  I can play my connect through the russound, however the myro:bridge doesn't display song/artist/album data, it only shows "add a sonos component". 

There is a Sonos bridge connected to a Gigabit switch as well as the CONNECT directly connected to switch via Cat-6. 

Any suggestions?  I have tried resetting myro:bridge several times and repeating boot sequence as well.

Title: Re: Sonos will not pair with Bridge
Post by: Myro Control on July 01, 2013, 04:58:19 pm

Hi!

This is normal -- you just need to complete the pairing process as done with all Sonos devices:

Press the volume up and mute button.  That will pair the Myro:Bridge with your Sonos:Connect

Thanks!
Danny

Title: Re: Sonos will not pair with Bridge
Post by: Teamstream on July 03, 2013, 03:03:15 pm

After "pairing" the "Add a sonos component" message is gone, but it still does not display any artist/song data.  I do have this set as an iBridge/iPod dock.

Title: Re: Sonos will not pair with Bridge
Post by: Myro Control on July 03, 2013, 08:22:57 pm

Please create a support ticket so we can work you through the steps to get your Myro:Bridge functioning.  Once we get it working for you then you can post a follow up to the forum.

Thanks!
Danny